Tag Archives: AAE

Avoid bubbles when using decals

Here is a very helpful Tipsheet produced by Tanya Veil at AAE glass, detailing how to reduce the bubbles in your decal work:

Tip #3 Keeping bubbles out of your dichroic glass jewelry pendants and decals
AAE GLASS DECALS 
One of the biggest enemies to any dichroic glass fused pendant jeweler is the dreaded bubble. No matter how hard we try, sometimes a bubble creeps into our pieces and is it unavoidable. It is frustrating when working with fusible glass water slide decals and a bubble appears just above the decal. Hopefully we can offer you a few tips on how to avoid the curse of the bubble. While there is no sure fire way to avoid a bubble, following these 4 steps should help.

1-Once the decal is applied, blot out any excess water with a paper towel.
2-When the excess water is removed, wrap the paper towel around your fore finger and GENTLY brush the entire decal design after the excess water is removed. Be sure to smooth out any wrinkles or folds in the decal.
3-You must let the decal dry for at least 12 hours before firing the glass.
4-***HOT TIP*** If you are in a hurry and can’t wait 12 hours to fire, use a blow dryer at close range for 20 minutes.

If you have any questions, feel free to email us at info@aaeglass.com. We have had several emails over the past few weeks and hopefully we have offered some helpful info.

AAE

Posted in Blog Posts | Also tagged , , , , , , Leave a comment